Thanos Marvel Hueforge

Project: Thanos.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 112.71x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.72mmThe Max allowed Thickness is 2.72mm and the Actual Thickness is 2.64mm #000000 PLA Basic Black Transmission Distance: 0.1 #7900b6 PLA Purple Transmission Distance: 2.5 #ffffff PLA Basic Jade White Transmission Distance: 5.8 #0086d6 PLA Basic Cyan Transmission Distance: 2.4 #c00d1e PLA Basic Red Transmission Distance: 3.7 #fce300 PLA Basic Yellow Transmission Distance: 5.2This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Purple At layer #13 (1.12mm) swap to Jade White At layer #16 (1.36mm) swap to Black At layer #17 (1.44mm) swap to Cyan At layer #20 (1.68mm) swap to Black At layer #21 (1.76mm) swap to Red At layer #22 (1.84mm) swap to Yellow At layer #26 (2.16mm) swap to Jade White for the rest. For single AMS users, start with 4 colors a