The angry ogre

You can have a better look at the model on my sketchfab (https://skfb.ly/6GyPO). A like would be very much appreciated =)

I have printed this model with 100% infill on my Anycubic mega. But it needs probably 5%, I made sure no floating parts inside.

Dunno why but at 200% the original size (about 6cm tall) I had some failures while printing the legs. This one I printed without failures at 300% size (about 10cm tall).

Ok guys so, I did this ogre for a challenge and decided to share with you all. This is the first of many to come.

HOPE YOU ALL LIKE! =)