the Captain from hellsing - hueforge

Hueforge of the Captain from hellsing by artist K-SuwabeThe photos shows the result in 141x200mm and a nozzle of 0.4Boost MeThanks for your boost!You can change the X and Y dimensions but do not change the Z dimensions You must define the printing parameters indicated in the description below and change the filament on the indicated layers. You can use filaments other than those indicated, but the result will differ. You can use any black PLA Hueforge descriptionPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 141.52x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.64mmThe Max allowed Thickness is 2.48mm and the Actual Thickness is 2.44mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #ff6a13 PLA BambuLab Basic Orange Transmission Distance: 7 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #d3b7a7 PLA BambuLab Matte Latte Brown Transmission Distance: 2 #c00d1e PLA BambuL