Thingiverse
The cure all UV box
von bruckerm
74
Downloads
43
Likes
0
Makes
I recently picked up an Anycubic Photon S for the lab. I had never done SLA printing myself, only vicariously through others who made things for me. But the high temp-resistant bio-resins are too tempting to not spend a few hundred bucks on a new printer... even if that makes my 3rd 3D printer... I might have a problem [not enough space for more printers].
Living in New England limits the amount of UV processing of prints you can do outside so, I got the obligatory UV light and solar-powered turntable. I had this on my workbench when I was curing prints but felt that the PPE and safety precautions I was taking needed to be upgraded, especially if I was to spend a lot of time in the workshop or lab with it on.
Hence, employing one 3d printer to make useful things for the other.
I made a box to hold anything that the 115 x 65 x 155 mm print volume of the Anycubic can put out.
You might notice the dual-tone print. Although I really like this, I wasn't intentionally getting fan
Living in New England limits the amount of UV processing of prints you can do outside so, I got the obligatory UV light and solar-powered turntable. I had this on my workbench when I was curing prints but felt that the PPE and safety precautions I was taking needed to be upgraded, especially if I was to spend a lot of time in the workshop or lab with it on.
Hence, employing one 3d printer to make useful things for the other.
I made a box to hold anything that the 115 x 65 x 155 mm print volume of the Anycubic can put out.
You might notice the dual-tone print. Although I really like this, I wasn't intentionally getting fan
bruckerm veröffentlicht auch auf
1 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!