Thingiverse
The Dynamite Lamp
von energiebrand
102
Downloads
108
Likes
0
Makes
Update 18th of March 2020: new TEST SET with 2 stripe LED holders
Update 17th of March 2020: added a TEST SET; print critical parts as examples
Update 17th of March 2020: added an English description
Update 17th of March 2020:
- modified German description (Power-Box)
- Power-Box and -Cover V2.STL (better fit)
A lamp with 64 warm-white LED inside the 6 outer tubes. All printed parts made from PLA.
A complete description is available in GERMAN. An ENGLISH translation will follow in the next 2 weeks.
Some parts can be printed with different options since all parts shall fit together without glue or screws. (28.2 or 28.3 means the inner diameter of the tubes; I used the 28.2 but 28.3 is maybe the better choice; check with a short tube example and a printed plug.
Read the description at first to select the parts you want to use! This is not a beginner project but all parts are easy to print if your printer is well adjusted. Only the tubes can be a little challenge. So use m
Update 17th of March 2020: added a TEST SET; print critical parts as examples
Update 17th of March 2020: added an English description
Update 17th of March 2020:
- modified German description (Power-Box)
- Power-Box and -Cover V2.STL (better fit)
A lamp with 64 warm-white LED inside the 6 outer tubes. All printed parts made from PLA.
A complete description is available in GERMAN. An ENGLISH translation will follow in the next 2 weeks.
Some parts can be printed with different options since all parts shall fit together without glue or screws. (28.2 or 28.3 means the inner diameter of the tubes; I used the 28.2 but 28.3 is maybe the better choice; check with a short tube example and a printed plug.
Read the description at first to select the parts you want to use! This is not a beginner project but all parts are easy to print if your printer is well adjusted. Only the tubes can be a little challenge. So use m
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
