The Flexy Stick Figure

This is The Flexy Slick Figure, or Flexyman for short. This is a stick figure that you can make out of silicone or TPU (I highly recommend making it out of silicone). It is fun to fidget and play with and has a simple look to it.

If you use the 3D printed mold box, you will need around 25 mL of your silicone solution to pour in. 15A is a good silicone thickness to make it springy, but if you prefer yours to be more limp and floppy, I would definitely use a softer silicone (I don't suggest using anything much harder than 15A. By that point the stick figure will become too stiff). I also recommend printing the two parts of the mold box vertically to get as much detail as possible (all the files should already be in the correct orientations for printing), and it still won't need any supports when printed like this. Make sure to also clamp the two parts of the mold box together before pouring the silicone.

For TPU, I am still experimenting. For this method, use the "TPU_Flexyman_V2" file