The Gladiator hueforge

by Michele MM3D · Hueforge & Lithophane

6 Downloads

10 Likes

2 Makes

Hueforged Gladiator Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mmThe Model is 130x130mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.1mmFilaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Red Transmission Distance: 4PLA BambuLab Basic Beige Transmission Distance: 8PLA BambuLab Basic Orange Transmission Distance: 5PLA BambuLab Basic Yellow Transmission Distance: 6PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions:Start with BlackAt layer #9 (0.8mm) swap to RedAt layer #13 (1.12mm) swap to BeigeAt layer #14 (1.2mm) swap to OrangeAt layer #15 (1.28mm) swap to YellowAt layer #18 (1.52mm) swap to Jade White for the rest.