The Greasy Strangler Hueforge

Hueforge of ‘The Greasy Strangler’ Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x112.4mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyLite Natural Transmission Distance: 21 PLA PolyLite Grey Transmission Distance: 1 PLA PolyLite White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Charcoal Black At layer #8 (0.72mm) swap to Natural At layer #13 (1.12mm) swap to Grey At layer #20 (1.68mm) swap to White for the rest.