The Lich King

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 97.35x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Dark Gray Transmission Distance: 0.9PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA PolyTerra Sapphire Blue Transmission Distance: 0.3PLA BambuLab Basic Turquoise Transmission Distance: 2PLA BambuLab Basic Beige Transmission Distance: 8PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 7 unique filaments Swap Instructions:Start with BlackAt layer #7 (0.64mm) swap to Dark GrayAt layer #10 (0.88mm) swap to Blue GrayAt layer #15 (1.28mm) swap to Sapphire BlueAt layer #16 (1.36mm) swap to TurquoiseAt layer #17 (1.44mm) swap to BeigeAt layer #20 (1.68mm) swap to Jade White for the rest.