The Lion King

Project: lion king 2.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 130x130mm in size You may print at higher layer heights below the Min Depth of 0.24mm The Max Depth is 2.2mm and the Actual Depth is 2mm Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyTerra Lava Red Transmission Distance: 1 PLA PolyTerra Savannah Yellow Transmission Distance: 3.5 PLA PolyTerra Cotton White Transmission Distance: 2.5 This print uses 4 unique filaments Swap Instructions: Start with Charcoal Black At layer #6 (0.56mm) swap to Red At layer #9 (0.8mm) swap to Yellow At layer #18 (1.52mm) swap to White for the rest. Enjoy