The Mandalorian Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmIf changing size . . . only change X and Y, not Z. The Model is 176.2x176.2mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Red Transmission Distance: 4PLA BambuLab Basic Gray Transmission Distance: 2PLA Sunlu Matte White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions:Start with BlackAt layer #14 (1.2mm) swap to RedAt layer #15 (1.28mm) swap to GrayAt layer #22 (1.84mm) swap to White for the rest.