The Moon

Here is a HueForge print of the moon I made. I used Sunlu Meta PLA for each color but the settings are as follows: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Recommended Filaments: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Gray At layer #13 (1.12mm) swap to White for the rest.