Thingiverse
The Simpsons House
por Bubolz
2.1k
Descargas
2.1k
Likes
15
Makes
The Simpsons house! 3D print house model of the most popular family on television! Model faithful to the original design. Articulated doors (front, back and garage) and removable roof
The project has small parts, before you start printing make sure your 3D printer is well calibrated, especially in relation to extrusion factor.
Use PLA for all parts.
The project does not require supports via software.
Windows and door frames have supports incorporated in STL, and can be identified by a tab added to the support to facilitate removal.
Minimum bed size 20x20x10, and maximum nozzle diameter is 0.4mm
Printing the windows.
0.18 layer height
Speed between 20 and 40 mm/s
Printing the bay windows
Keep this piece rotated 45 ° on the table
0.18 layer hight
Speed between 20 and 40 mm / s
Printing doors
0.18 layer hight
Speed between 20 and 40 mm / s
Printing hinges
0.18 layer hight
Speed between 20 and 40 mm / s - 2X
Printing the roof
0.2 layer hight (or less
The project has small parts, before you start printing make sure your 3D printer is well calibrated, especially in relation to extrusion factor.
Use PLA for all parts.
The project does not require supports via software.
Windows and door frames have supports incorporated in STL, and can be identified by a tab added to the support to facilitate removal.
Minimum bed size 20x20x10, and maximum nozzle diameter is 0.4mm
Printing the windows.
0.18 layer height
Speed between 20 and 40 mm/s
Printing the bay windows
Keep this piece rotated 45 ° on the table
0.18 layer hight
Speed between 20 and 40 mm / s
Printing doors
0.18 layer hight
Speed between 20 and 40 mm / s
Printing hinges
0.18 layer hight
Speed between 20 and 40 mm / s - 2X
Printing the roof
0.2 layer hight (or less
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
