The Weeknd - Star Boy

The Weeknd - StarboyPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x198.75mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm Filaments Used: PLA BambuLab Matte Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 1 PLA BambuLab Basic Red Transmission Distance: 1 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Matte White Transmission Distance: 5This print uses 5 unique filaments **If Using AMS**If using AMS assign white to Black. Once the black layers are finished printing swap out the black filament for white. This can be done anytime when blue, red, or yellow are printing. **No AMS Instructions**Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue At layer #10 (0.88mm) swap to Red At layer #13 (1.12mm) swap to Yellow At layer #24 (2mm) swap to White for the rest.