Slicer Discord
Thermal Camera – 3D-Druckmodell von Thingiverse Thingiverse
Thermal Camera – Bild 1 Thermal Camera – Bild 2 Thermal Camera – Bild 3 Thermal Camera – Bild 4 Thermal Camera – Bild 5 Thermal Camera – Bild 6

Thermal Camera

1.5k Downloads
1.2k Likes
3 Makes
Zum Modell
Thermal Camera
----------------------

This Thermal Camera was inspired by the DIY Mini Thermal Camera from Adafruit, based on the 8 x 8 infrared grid array sensor amg8833. This version is based on the cheap ESP8266 and an ILI9341 touch screen. Two software versions are available, one is based to the Adafruit example, the second and more advanced regarding interpolation, is based on the code of Kris Kasprzak. Both were slightly enhanced to provide a portrait screen orientation, a thermal scale, a touch screen autoscale function, a lipo monitoring and a temperature measurement in the center.

By exchanging the micro controller, the total cost of hardware was reduced to around 55€. Since the design was kept simple and the code was available, this was a nice little weekend project.

As AliExpress offers a smaller version of the amg8833 pcb, Manuauto designed a small adapter to fit the housing. The adapter is available at https://www.thingiverse.com/thing:3066479. Link the sensor pc
Quelle
Thingiverse
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Polycarbonate
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen