Thingiverse
ThermIQ esp32 oled
door x2swe
5
Downloads
3
Likes
0
Makes
ThermIQ (www.thermiq.net) interface card för Thermia heatpumps, enables support for use via home assistant HASS, This is a case for the ThermiQ-ROOM2 i got delivered in early 2022, note that deliverys later in 2022 is built with addon boards ( so this case will NOT fit the newest ThermIQ-ROOM2 )
Case for a MELIFE 0.96" OLED esp32 ESP-WROOM-32.
Searched for a case for my ThermIQ-room2 from 2022, think its built on the MELIFE, found ERICBARIL72s .stl file.
from the original stl i stretched the box 1 mm in length to get esp32 card to fit inside the case; due to connections/wires to the board i added some space in the "lid"( which actually is the bottom ) to the board and some cut outs on the sidings. Got some buttons included, one is a tad longer ment to be used as menu button ( extra pair of buttons if you need to modify according to depth inside)
you might have to use a small drill to widen the holes for the buttons.. or perhaps you just print the buttons a bit smaller.. (
Case for a MELIFE 0.96" OLED esp32 ESP-WROOM-32.
Searched for a case for my ThermIQ-room2 from 2022, think its built on the MELIFE, found ERICBARIL72s .stl file.
from the original stl i stretched the box 1 mm in length to get esp32 card to fit inside the case; due to connections/wires to the board i added some space in the "lid"( which actually is the bottom ) to the board and some cut outs on the sidings. Got some buttons included, one is a tad longer ment to be used as menu button ( extra pair of buttons if you need to modify according to depth inside)
you might have to use a small drill to widen the holes for the buttons.. or perhaps you just print the buttons a bit smaller.. (
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!