TheyAteErDergs magnet

Drawing comes from Josh Seefried on X (Formely Twitter), which make this an NC file Editing, Conversion to 3D printed file, Layering, are all my work using Photoshop to clean out background, HueForge to create the layering and coloring. For personal usage only. If you find this offensive, PM me and let me know, not give me a low rating because of your feelings. The file and print work as should. This can be printed without AMS but you will need to add pauses described. Make sure to add all the pauses and slice again before sending to the printer. To make it a magnet you will need to have some flexible sheet magnet material and cut an approximate outline of the printed file and affix it to the back of the print. Project: TheyAteErDergs.4mm nozzlePrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 100.99x100.99mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.9mmFilaments Us