Thin Wall (0.5mm) Extrusion Test

Thin Wall Extrusion Test for setting extrusion multipliers and retract.

In Cura settings/Print/Structures, you need to make sure that Shell thickness (use multiples of nozzle size), is less than or equal to 0.5mm or if you're using Slic3r, you should have (Print Settings/Layer & Perimeters/Detect Thin Walls) selected.

I used Repetier Host 1.5.5, with integrated slic3r 1.2.9 & Cura 15.01

Slic3r works fine.
I simply can't get Cura to generate 0.5mm walls.
Using 0.2mm layers, and adjusting Filament Diameter, Flow%, and Nozzle Diameter.

The Slicer Config that worked for me was:
# generated by Slic3r 1.2.9 on Fri Oct 2 11:50:40 2015
avoid_crossing_perimeters = 0
bed_shape = 0x0,140x0,140x140,0x140
bed_temperature = 113
before_layer_gcode =
bottom_solid_layers = 3
bridge_acceleration = 0
bridge_fan_speed = 100
bridge_flow_ratio = 1
bridge_speed = 60
brim_width = 0
complete_objects = 0
cooling = 1
default_acceleration = 0
disable_fan_first_layers = 3
dont_suppo