Thing-O-Matic Foot

This is a foot for the corners of your Thing-O-Matic.

I made these because I moved my electronics board but did not want the ToM to continue to sit on the bare wood. They raise it up ~1/2" (14mm) and have an overall height of ~1" (24mm). They were not designed to be used if your board is in place... but this has been modified in the para_foot.scad file so you can generate versions that will work just fine.

I prefer to make everything able to be manipulated and I used OpenSCAD so you will find a number of parameters to control the size of these parts. Right now it is designed to provide 5.6mm wide channels that are 10mm deep, which is the width of the laser cut panels used on these devices (and should work for Cupcakes also) while providing a good depth for stability (which can be changed as you desire also).

The Thingomatic Feet by deltagear was an inspiration but I wanted something a bit smaller, that did not need to be rescaled and that I could reuse for other things. A sing