Thingiverse
Thread Stand For Home Sewing Machine
por nthesign
88
Descargas
73
Likes
1
Makes
Design of thread stand for home sewing machine.
To make the handle, it is necessary to use any rod with a diameter of 6 mm.
I used PLA fiament.
layer height 0.2mm
infill 30%
you have to pay attention to the tolerance of the holes depending on the accuracy of the printer, the filament used and the exact diameter of the rod.
You may need to change the diameter of the holes.
Check out my youtube channel. I explain how I created this project. :)
https://youtu.be/AHhzvOWc3Ck
Enjoy :)
To make the handle, it is necessary to use any rod with a diameter of 6 mm.
I used PLA fiament.
layer height 0.2mm
infill 30%
you have to pay attention to the tolerance of the holes depending on the accuracy of the printer, the filament used and the exact diameter of the rod.
You may need to change the diameter of the holes.
Check out my youtube channel. I explain how I created this project. :)
https://youtu.be/AHhzvOWc3Ck
Enjoy :)
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
