Throwing Star for Soft Darts

Throw your soft darts like a ninja! Just insert 8 soft darts points with a common 2BA thread. To be honest: It's just for fun! In my tests only about 50% of the throws stuck in the board. You need to throw with less rotation than with a normal throwing star. I printed both PLA and ABS with 0.10mm layer height (!), 4 walls, 25% infill and without support. Printing with a .2 nozzle produces cleaner and more stable threads, so I recommend it, but .4 nozzle also works. I widened the walls of the 2BA threads only by 0.05mm, that's not very much for 3d-printing but brought the best results on a modern printer. Depending on your printer you may need a tool to screw the points in. Please don't over-tighten, the threads are very fine! You may also print the test piece first. It needs less than 1g of filament.