Thingiverse
Thrustmaster Joystick Tap Handle Adapter
por ESzczesniak
2
Descargas
1
Likes
0
Makes
This is a simple adapter to join a spare or sidelined Thrustmaster A-10/F-16/F-18 Joystick grip to a standard 3/8-16 beer tap handle.
Prototypes were printed in PLA+, 0.2mm layer height, 6 walls, 25% infill and appear solid.
Final product as shown is ABS with 0.08 mm layer height, 6 walls, 30% infill.
The 3/8"-16 thread will fit from a well calibrated printer, but is tight. If you have one, running a 3/8"-16 tap will clean up the tread and make it smooth.
The outer thread is M36-2.0mm and a bit of force on the first run cleans the thread up well and it works well following.
Prototypes were printed in PLA+, 0.2mm layer height, 6 walls, 25% infill and appear solid.
Final product as shown is ABS with 0.08 mm layer height, 6 walls, 30% infill.
The 3/8"-16 thread will fit from a well calibrated printer, but is tight. If you have one, running a 3/8"-16 tap will clean up the tread and make it smooth.
The outer thread is M36-2.0mm and a bit of force on the first run cleans the thread up well and it works well following.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
