Thrustmaster TH8S Reverse and 7th gear lockout mod

This mod locks out Reverse and 7th gear not letting you get past those gear gates at all to eliminate all possible mistakes. E.G. Since 7th is not used too often you can use/bind 7th as Return to Pits function or any other. Additional parts you will need: 1 - Qty 1 - spring 0.4mm, 50mm, 10mm (0.4mm wire thickness/diameter, 25mm spring length, 10mm spring diameter) (The wire thickness/diameter can be larger for more resistance, but this works just fine for me as it's what I had lying around. I got mine here : https://a.aliexpress.com/_mNLG1H3 - that one is 50mm but I cut mine in half and used 2 to double the spring. 2 - Qty 2 - M3 screws 10mm length Print Settings: .16mm layer height for a cleaner print of the pull up lever. The pull up lever has XY Hole Compensation set to 0.250. Depending on the filament you use, the fit can be different. If the lever is too loose on the shaft you can lower it to 0.125 or to 0. If it is still too tight you can increase it. I have included a small test