Thunder Eye - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 170x170mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 1.8mm and the Actual Depth is 1.8mm Filaments Used: Black / PLA+ HIGH SPEED Jamg He Black Transmission Distance: 0.3 Drak Grey / PLA Spectrum Basalt Grey Transmission Distance: 0.6 Light Grey / PLA HIGH SPEED 3DPower Telegrey Transmission Distance: 3.1 White / PLA+ HIGH SPEED Jamg He White Transmission Distance: 6.9This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Dark Grey At layer #9 (0.8mm) swap to Light Grey At layer #13 (1.12mm) swap to White for the rest.