MakerWorld
Hueforge & Lithophane
Voir le modèle
Thundercats Hueforge
12
Téléchargements
10
Likes
8
Makes
Project: thundercats2 stl.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 140x140mm in sizeYou may print at higher layer heights below the Min Depth of 0.8mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 PLA BambuLab Basic Jade White Transmission Distance: 5 Boost MePlease consider buying me a coffee! :)This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Red At layer #17 (1.44mm) swap to Ash Gray At layer #21 (1.76mm) swap to Jade White for the rest.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
