Thundercats Hueforge

by Dakiren

99 Downloads

87 Likes

43 Makes

Download Model

cosmocats thundercats hueforge table dakiren

Boost MeProject: Thundercats.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 240x199.94mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Beige Transmission Distance: 8PLA BambuLab Basic Jade White Transmission Distance: 5PLA Elegoo Red Transmission Distance: 4This print uses 4 unique filamentsSwap Instructions:Start with BlackAt layer #6 (