Thundercats

Please rate my prints, this really helps me, thank you Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 140.63x150.01mm in sizeYou may print at higher layer heights below the Min Depth of 0.88mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Kingroon Red Transmission Distance: 4.2This print uses 2 unique filaments Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Red for the rest. Boost MeI hope you like the print if you do please consider a boost. It's for free and it would help me a lot. Thank you and enjoy the print