MakerWorld
2D Art
Zum Modell
Tiger fire Drip - Hueforge 4 colour
24
Downloads
22
Likes
15
Makes
Fire Drip Tiger Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size IF YOU WISH TO SCALE PLEASE DO NOT CHANGE Z HEIGHT You may print at higher layer heights below the Base Thickness of 1.12mm The Max allowed Thickness is 3.36mm and the Actual Thickness is 2.8mm Filaments Used: #000000 PLA Sunlu Matte Black Transmission Distance: 0.1 #c12e1f PLA BambuLab Basic Red Transmission Distance: 3.8 #f4ee2a PLA BambuLab Basic Yellow Transmission Distance: 5.3 #ffffff PLA sunlu white Transmission Distance: 6.8 This print uses 4 unique filaments Swap Instructions: Start with Matte Black At layer #14 (1.2mm) swap to Red At layer #19 (1.6mm) swap to Yellow At layer #26 (2.16mm) swap to white for the rest.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
