Tiger HueForge

Tiger HueForgePrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200.01x100.16mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3mm and the Actual Depth is 1.7mmFilaments Used: PLA+ Sunlu Black Transmission Distance: 0.3 PLA+ Sunlu Dark Gray Transmission Distance: 3 PLA+ Sunlu White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Gray At layer #13 (1.12mm) swap to White for the rest.