Tiger HueForge

One of my very first HueForge designs.I used CoPilot to generate the image, then I used Affinity Photo to make it transparent for HueForge. The colors I used were:Sunlu:BlackWhiteOrangeGreyHere are the instructions from HueForge for color change but should work already as is on a Bambu with AMS with the 3MF file or simply position the colors in the same way: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.5mm and the Actual Depth is 2.5mm Filaments Used:PLA Black Transmission Distance: 0.6PLA Orange Transmission Distance: 8PLA Gray Transmission Distance: 2PLA Jade White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions:Start with BlackAt layer #15 (1.28mm) swap to OrangeAt layer #25 (2.08mm) swap to GrayAt layer #27 (2.24mm) swap to White for the rest.