Tiled Reggae Plaque - with video

This is infact a 2 part work, if you wish to do the second part. This is very easy. You will require and do the following Big 1" round paint / make up brush Masking take Black Acrylic Paint Clear Coat / Clear Lacquer / Clear Varnish Finish When you have printed this out, you will see three of the tiles are lower down. Put masking tape on the higher three tiles. You do NOT need much paint. You want it on the brush so it barely paints. Here's how. Add paint to the brush, sparingly. Wipe the paint off on a scrap paper until it is only painting very faintly. Then you can paint the lower tile edges. It is only to darken them slightly. Work into the corner of the tiles and as you come out, create a round fade. Stay at the edge. Then clean the brush and dry it. Then you can blend by wiping the brush down the edge. IF YOU ARE UNSURE, try doing this on scrap paper, using the masking tape to create an edge. You will see how it works. When you are happy, remove the masking tape. You will have added depth and life through age to the print. PS. you can print the whole thing in white and then paint it all yellow. Paint the red and green in from the edge, using similar technique as above to blend the red and green into the yellow. You can use a sponge to move and blend the colours. Practice on scrap paper first. This model is made based on a painting I made a few years ago. Watch this being made : https://fb.watch/vSUAJ_U70K/