Tilt Maze

Fully working tilt-maze game. Assembly:asemmble y-movement. First the gear-rack braces, followed by the small springs to lock them in place. Then add gear-rack-Y and the angled members.Assemble the Y-axel components. First insert the bearings in to the side of the housing and the Y-housing, theese are selflocking. Slide the Y-housing in place and fix with spring. Fix the endstop to Y-axel with a small scew(3x16mm) and push it throug the housing-trough 13tooth gear-trough side of housing. Fix the Y-knob on the outside to the axel with small screw.Assemble X-movement as before with Y.Assemble X-axel much like Y. Here there is 3 bearings, 2 as before and one bigger for the side of the housing. Here you need to start from the outside and push trough housing-trough X-housing-trough 13teeth gear- trough the fixed housing in the middle. Assemble outer frame to main housing. First glue the outer frame fastners to corresponding slots in the outer frame. Put the Y-tilt pieces from the outside in