Tim Curry - Legend 1985 - Hueforge

Tim Curry from the movie Legend (1985). *Note - Bambu Basic Orange was used for the image posted. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x111.78mm in sizeYou may print at higher layer heights below the Base Thickness of 0.96mmThe Max allowed Thickness is 3.44mm and the Actual Thickness is 2.56mmFilaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5 #ffe17f PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 5 unique filaments Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Red At layer #17 (1.44mm) swap to Pumpkin Orange At layer #21 (1.76mm) swap to Lemon Yellow At layer #24 (2mm) swap to Jade White for the rest.