Timex Sinclair 1000 Case TS1000

I'm updating a Timex Sinclair 1000 and wanted a nicer case (the original shows a bit too much damage).

Sagittario modeled an amazing ZX81 case and generously shared his model source with me. He even moved the video out port to match the difference on position for the ZX81.

This build requires m2.5 screws in a couple lengths. The threads are modeled, but take care with metal screws in plastic.

**Important note:** To greatly reduce the amount of heat produced, I'd recommend you change the 7805 5V regulator for the more modern Traco 2-2450 (or a 1-2450 might work fine). You should be able to remove the heatsink with this change. If you do change to the Traco, I'd recommend you lay it flat instead of upright (see included photo) as placing it upright will likely not fit in this case with my modifications to the keyboard tray. **It is possible the original voltage regulator might get too hot for PLA, especially if you use a 12V power supply.**

This remix, targeting the TS100,