Tin Tin Rocket 1,05 meter

SummaryCan be printed without support. Every stage is numbered from the bottom up in white and red. The stages will fit in each other and then glued together.I printed all with adaptive infill 3 stages 30%.I assume you can print it private and no commercial use is allowed on this model.1.05 meter - Print time is about 166 hours.Schokdemper (Shock absorbers) - 3xOmmanteling (Landing-support fairing) - 3xStaartstuk1 (Stabilizing fins) - printed flat on bed 3xStaartstuk2 (Stabilizing fins) - printed flat on bed 3x0r (Motor and storage rooms) - print in red 1x and turn Stl 180 degrees1r (stage 1) - print in red 1x1w (stage 1 ) - print in white 1xFit 1r and 1w together2-5r (stages 2-5)- print in red 1x pro stage2-5w (stages 2-5)- print in red 1x pro stagetop - print in red 1xAntennaYou can choose the round antenna in 2 parts and glue together or the single one (turn stl 90 degrees and brim to print) . it fits in the top part.If you all printed glue parts together. PLA can be done with super