Thingiverse
Tinkerlight Desk Lamp
von bball61
31
Downloads
44
Likes
0
Makes
This is the desk lamp design for the Tinkerlight system. It requires the lamp hardware kit.
Full details of the system are at:
http://robot50.net/projects/tinkerlight/
I have a batch of hardware kits for sale on ebay for $5 each: http://www.ebay.com/itm/-/152286884727?.
You will also need your own USB power source.
The desk lamp has a spare design with an H base and an arm that can extend from about 9 inches of total lamp height to about 12 inches. The shade pivots and the base includes two cord keepers. The spot lens in the kit may optionally be mounted for a tighter pool of light.
The light source supplied with the kit is a neutral white (4000-4500k) LED that consumes 2.25 watts (450ma at 5 volts).
The desk lamp parts will print on most printers without supports and a 6x6x6 build platform. ABS is recommended for its higher heat resistance but the lamp will work with PLA.
Full details of the system are at:
http://robot50.net/projects/tinkerlight/
I have a batch of hardware kits for sale on ebay for $5 each: http://www.ebay.com/itm/-/152286884727?.
You will also need your own USB power source.
The desk lamp has a spare design with an H base and an arm that can extend from about 9 inches of total lamp height to about 12 inches. The shade pivots and the base includes two cord keepers. The spot lens in the kit may optionally be mounted for a tighter pool of light.
The light source supplied with the kit is a neutral white (4000-4500k) LED that consumes 2.25 watts (450ma at 5 volts).
The desk lamp parts will print on most printers without supports and a 6x6x6 build platform. ABS is recommended for its higher heat resistance but the lamp will work with PLA.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
