Tiny Dice Tower Remix with Catch Tray

This is a simple remix of Kyleee's original Tiny Dice Tower with a dish/tray added to catch the dice coming out of the tower as they roll out. Link to original model: https://makerworld.com/en/models/216728?from=search#profileId-235759 I've test printed this on a Bambu A1 Mini with multiple types of silk PLA so far. The normal print profiles form the original should work fine. I used a textured PEI build plate and Generic Silk PLA profile. I found no brims or supports or rafts were needed. My print settings started with a 0.2 mm layer standard profile as the base, then made the following changes: used Arachne wall generatorincreased wall loop count from 2 to 3reduced top shell count to 3 and reduced top shell layer thickness to 0.8 mmadaptive layer height with quality/speed slider at 5, then smoothed with radius slider at 5slowed outer wall speed to 180 mm/sec, inner wall speed to 280 mm/seccrosshatch infill pattern at 12% sparse infillNo hardware needed, no assembly required.