Tiny Epic Defenders Map Tray

I took Tev's awesome interconnected map trays for Tiny Epic Zombies, scaled them larger for sleeved cards, raised the top part of the tray, and decreased the tab tolerances for a tighter fit.

I didn't like my initial 0.5mm tolerance on the tabs, so I've increased it to 0.75mm. It's still a tight fit. With the 0.5mm I had to sand some of my pieces, probably due to my slicer settings.

The sleeved cards fit perfectly now except for a tiny bit around the corners. You may want to round your sleeve corners, particularly at the open end. Or not as the good fit does mean that the map cards won't fall out. Popping the sleeved cards out with no damage is easy due to Tev's design. I left my corners as-is.

For Tiny Epic Defenders you'll need 7 map trays. Some of the connectors are more optional than others. If you choose to print them, you'll need 1 each of the corner connectors. More optionally, you'll need 2 long connectors (or 4 short connectors) and 2 middle connectors for the top and