Thingiverse
Tiny Epic Games Board helper (Magnetic)
door slant675
0
Downloads
2
Likes
0
Makes
A magnetic version of the fantastic design from [toposolitario](https://www.thingiverse.com/toposolitario). Uses 1mm x 4mm circular magnets ([example on Amazon, not an affiliate link](https://www.amazon.com/gp/product/B096G9JN3X)).
Tips for installing magnets:
- Install magnets using superglue with one positive and one negative on each edge, keeping the position consistent across all edges (i.e. positive is always above the negative on each edge or vice versa).
- I found that keeping the magnets in an inch-long stack made it more manageable to hold while installing.
- After adding a drop of glue into the hole on the frame, but before installing a magnet, check the pole against an already-installed magnet to ensure you have the magnet's orientation correct.
Tips for installing magnets:
- Install magnets using superglue with one positive and one negative on each edge, keeping the position consistent across all edges (i.e. positive is always above the negative on each edge or vice versa).
- I found that keeping the magnets in an inch-long stack made it more manageable to hold while installing.
- After adding a drop of glue into the hole on the frame, but before installing a magnet, check the pole against an already-installed magnet to ensure you have the magnet's orientation correct.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
