Tiny-Touch NMPG

This is a remix of my Tiny-Touch V1 (https://www.thingiverse.com/thing:3833861). The NMPG appendix stands for "No Magnets, Pure Gravity" ;o) In order to achieve this, you have to print the parts with a layer height of 0.1 mm (or less). Changes compared to V1: - needs no magnets - slimmer body / flag - slotted mounting holes - IR sensor cap added (optional) Wiring is the same as in V1. BOM: 1 x 5V linear nano servo like the Graupner Mosquito R (https://www.graupner.com/Servo-Mosquito-R/14001/) or this https://www.banggood.com/de/1_5g-180-Degree-Nylon-Gear-Digital-Linear-Micro-Servo-3_7V-5V-For-Micro-RC-Airplane-p-1529910.html?rmmds=search&ID=41322&cur_warehouse=CN (make sure it's "R" not "L") 1 x standard IR endstop like this one: https://www.roboter-bausatz.de/en/3d-printing/3d-printer-electronics/endstops/142/optical-limit-switch-with-cable-set-3-pin-50cm-for-cnc-3d-printer-or-doors?number=RBS10091 1 x JST XH 4POS header like this one: https://electronics.semaf.at/4-Pin-200mm-JST-Connector-Through-Hole?curr=EUR&gclid=EAIaIQobChMIkbDa-9al5AIVhuiaCh09cgsnEAQYAyABEgKLlfD_BwE 1 x M3 x 25 mm screw 2 x Philips screws 2.9 x 9 mm 1 x Phillips screw 2.2 x 6.5 mm (for the cover) a couple of wires