Thingiverse
Tinyhawk 2 Freestyle Insta360 Go Mount
24
Téléchargements
11
Likes
0
Makes
Tinyhawk 2 Freestyle removable and adjustable mount for the Insta360 Go.
Designed to be printed using TPU, Not sure about the tolerances using PLA etc.
No supports needed.
I wanted something that was easily removed and had plenty of protection for the camera. It's a little heavier than most, but it flies fine, you will notice the weight in quick rolls. But designed for slower flights.
Space for a small strap, but not required, It holds really well in place. But I'm paranoid.
If you require a larger angle, you might want to adjust the model slightly to suit.
Requires 2x 8mm M2.5 Bolts to secure the mount.
Bolts I used:
https://www.radiosailing.co.uk/m25-8mm-ssteel-hex-bolts--nuts-pack-of-20-556-p.asp
Designed to be printed using TPU, Not sure about the tolerances using PLA etc.
No supports needed.
I wanted something that was easily removed and had plenty of protection for the camera. It's a little heavier than most, but it flies fine, you will notice the weight in quick rolls. But designed for slower flights.
Space for a small strap, but not required, It holds really well in place. But I'm paranoid.
If you require a larger angle, you might want to adjust the model slightly to suit.
Requires 2x 8mm M2.5 Bolts to secure the mount.
Bolts I used:
https://www.radiosailing.co.uk/m25-8mm-ssteel-hex-bolts--nuts-pack-of-20-556-p.asp
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
