Tire mold - ZeroBot pro

Well, I wanted to print this little robot. But I didn't have flexible filament. So I decided to make a tire mold. I used this to fill the mold with: https://www.amazon.de/gp/product/B005D6WN3S/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=vapefreak-21&linkId=6766724b24c46b749425403f4c9e3aba

It's working really good, as the pictures shows you.
I think this is a really great option for all who can't use flexible filament or don't want to buy a whole roll of this stuff for a single project.

To use this mold, simply print both parts. They will fit only in one direction.
Press fit the rim part into the mold and fill the mold. After 2-3 hours your tire is ready.
Use a screwdriver to carefully press out the rim part out of the mold thing and fill it again for the second tire.

Print Settings

Printer: CR-10
Infill: 30%
Layer: 0,2mm
Support: no
Raft: no
Print-time: about 2 - 3 hours

Designed in 3D-Builder

Used filament:
DigitalRise PETG black
https://www.amazon.de/gp