TKS GTR 2s-4s

TKS GTR Setup 1 :

TKS frame 3D printed ( NylonX bottom plate , PLA+ Top plate )
Flight Controller TuneRC 1s/2s
Happymodel ExpressLRS rx
PandaRC Nano VTX
FPVCYCLE 13mm 6350kv 2mm Shaft
HQprops 2.5"x2x3 ( Drill out to from 1.5mm to 2mm ) Can provide the tool
2s 450 mah - 650mah ( Could go up to 4s with a Different FC Firmware
Quicksilver ( Preset 2" ) Flash,Bind,Preset,Fly FBPF !


TKS GTR Setup 2 :

TKS Frame 3D printed ( Polymaker PC-MAX , Both Bottom/Top plate )
Flight Controller TuneRC 1s/2s
ExpressLRS FYUJON ( RX (ceramic) + VTX )
Happymodel 1102 10000kv
HQprops 2.5"x2x3 1.5mm
2s 450mah
Firmware Quicksilver ( Preset 2") FBPF


I highly recommend using M2 motor mount instead of M1.4 ! You can find 1102 with 4 holes motor mount if you want to stick to that size .



Motors Suggestion :

Apex 1103 9999kv

Hyperlite 1204.5 8022kv

Xing Nano 1202 8000-10000kv

FPVcycle 13mm 6350kv 2s/3s

Happymodel 1