Thingiverse
Tobacco Case
by maliminium
2
Downloads
1
Likes
0
Makes
A tobacco case with separate compartments for tobacco, papers and filter tips.
3 pairs of 4x4mm cylindrical magnets are needed. Holes are dimensioned for snap on usage. But beware of the polarities.
https://www.youtube.com/shorts/-XAPGgSMBu0
Onshape link:
https://cad.onshape.com/documents/ed365844df4fa1a92efd3380/w/1ea063e650f09262f8ca7652/e/974a9228d4ced77c56c26195?renderMode=0&uiState=633167020198cd58a38fae36
Three parts are printed in place with the help of the support part.
* Open TCase-Body and TCase-Support in Cura.
* Select TCase-Support and click *Print As Support* from the left side menu
* In the same menu, click *Select Settings* and disable *Drop Down Support Mesh*
* Select both models, right click and click *Merge Models*
* From the profile settings on the right side, do the following changes:
Support Type - Lines
Support Interface - Disabled
Support X/Y Distance - 0.4
Support Top Distance - 0.2
Support Bottom Distance - 0.2
Si
3 pairs of 4x4mm cylindrical magnets are needed. Holes are dimensioned for snap on usage. But beware of the polarities.
https://www.youtube.com/shorts/-XAPGgSMBu0
Onshape link:
https://cad.onshape.com/documents/ed365844df4fa1a92efd3380/w/1ea063e650f09262f8ca7652/e/974a9228d4ced77c56c26195?renderMode=0&uiState=633167020198cd58a38fae36
Three parts are printed in place with the help of the support part.
* Open TCase-Body and TCase-Support in Cura.
* Select TCase-Support and click *Print As Support* from the left side menu
* In the same menu, click *Select Settings* and disable *Drop Down Support Mesh*
* Select both models, right click and click *Merge Models*
* From the profile settings on the right side, do the following changes:
Support Type - Lines
Support Interface - Disabled
Support X/Y Distance - 0.4
Support Top Distance - 0.2
Support Bottom Distance - 0.2
Si
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
