Token Case for Riftbound

This is my universal token case for Riftbound. You can store up to 32 tokens. All tokens shown in the picture are also printable from the same print profile. I recommend printing the case with a 0.4 nozzle and if you want more detailed tokens, print them with a 0.2 nozzle (but 0.4 is fine). You DO need 5x3mm magnets in order to use this print, you can use glue to secure them on their holes. You can print everything without AMS. To do it, please follow these steps: Slice the plate you want to print and add a pause on the layer 12 (if you are using 0.4 nozzle) or 24 (if you are using 0.2 nozzle). You can add a pause by dragging the vertical green slider at the right of the screen until it is over that layer, then right click > Add pause.Start the print.The print will stop at that layer, when it does: go back to your printer menu and change your filament manually to the one you want to be printed on top. When you do, resume the print.You are done! If you have any suggestions or feedback,