Thingiverse

Tolerance Clearance progressive fast test

by simonwebnet

47 Downloads

27 Likes

0 Makes

I designed this tester for tolerance and clearance which combines printing speed, amplitude and measurement continuity. The main values are readable on the scale and the intermediate values for the small divisions are readable on the back (with the vertical writing), to be associated with the divisions based on their position.
I have eliminated any possible problem related to the elephant foot so it is possible to print it even without the use of raft, if this can be convenient for adhesion.
It is possible to print one for each layer thickness value, I suggest 0.12 for high resolution design simulations and 0.2mm for medium resolution ones.
Clearance and tolerance are measured at an angle of 45 degrees to the horizontal plane, therefore the measured values will take into account the precision on the three axes as a whole, a fundamental method not to produce problematic designs.
The writings on the nut to be screwed indicate the correct use direction (do not invert it: under p

3dbench 3dbenchmark 3d printer tool accuracy bench benchmark Benchmarking calibration clearance clearance test Ender3 Ender 3 Ender 3 Pro fast print fast printer test helpful measure Measurements precision quick 3dbench 3dbenchmark 3d printer tool accuracy bench benchmark Benchmarking calibration clearance clearance test Ender3 Ender 3 Ender 3 Pro fast print fast printer test helpful measure Measurements precision quick

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format