Thingiverse
Tolerance cube v1
11
Download
8
Likes
0
Makes
This tool I have designed to test if the tolerance settings for your printer are correct.
The cube is a standard 20x20x20mm cube, the outer cube inner diameter is X20mm Y20mm Z25mm and the outer is 30x30x25mm.
If your tolerances are set correctly the 20x20x20mm should fit in the box.
Use calipers to determine how much the box is off and adjust this is Chitubox or Cura.
V2 doesn't have the letter suspended in the air. better for the Resin printers.
The cube is a standard 20x20x20mm cube, the outer cube inner diameter is X20mm Y20mm Z25mm and the outer is 30x30x25mm.
If your tolerances are set correctly the 20x20x20mm should fit in the box.
Use calipers to determine how much the box is off and adjust this is Chitubox or Cura.
V2 doesn't have the letter suspended in the air. better for the Resin printers.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
