Tollerance Tester

Not having yet clear the minimum tolerances of my printer, I created this simple tool to perform a quick test.
The tool tests tolerances from 0.2 to 0.4 mm.
Added two more versions;
The "bis" has the same dimensions but with the addition of a bevel on the corners at the base of each element, this to prevent the first layer (in which it is often printed at 120% of width), can compromise the test:
The v2 has other dimensions, wider tolerances and a different section.
The handling of the blocks of the three versions can be facilitated by using a 6mm socket wrench.
Added v2 lighter
Take a look to my new Fidget Spinner Tolerance Tester>https://www.thingiverse.com/thing:3591280 and also to the single buttons tester here>https://www.thingiverse.com/thing:3594129
Good test at all! :)
----------------------
Non avendo ancora ben chiaro le tolleranze minime della mia stampate, ho creato questo strumento semplice per eseguire un veloce test.
Il tool testa tolleranze da 0.2 a 0.4 mm.