Tommy Warrior Knight

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 1.9mm and the Actual Depth is 2mmYou can scale image along X and Y axis, do not change Z axis Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Red At layer #16 (1.36mm) swap to Black At layer #18 (1.52mm) swap to Gray At layer #21 (1.76mm) swap to Jade White for the rest.