Toothless and LightFury Hueforge

Project: Toothless and LightFury.hfpPrint at 100% infill with a layer height of 0.06mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.88mmThe Max allowed Thickness is 3.04mm and the Actual Thickness is 2.86mmFilaments Used: (* = Owned) #000000 * PLA Basic Black Transmission Distance: 0.1 #6a89a7 * PLA Blue Grey Transmission Distance: 2.3 #ffffff * PLA Basic Jade White Transmission Distance: 5.8 #0086d6 * PLA Basic Cyan Transmission Distance: 2.4 #fce300 * PLA Basic Yellow Transmission Distance: 5.2This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #15 (1mm) swap to Blue Grey At layer #19 (1.24mm) swap to Jade White At layer #25 (1.6mm) swap to Black At layer #27 (1.72mm) swap to Cyan At layer #31 (1.96mm) swap to Yellow At layer #35 (2.2mm) swap to Cyan At layer #40 (2.5mm) swap to Jade White for the rest. For only one AMS, start with 4 colors as follows,Slot1: BlackSlot2: Blue Gre